2019年5月20日 星期一

Ruckus ICX 7150 升級 4*10G



Ruckus ICX 7150

Upgrading or downgrading SAU licenses

Upgrading and downgrading to a SAU licensed feature set uses the same commands and similar steps.

Upgrading an SAU license

To upgrade a license on a device that supports SAU licenses, perform the following steps. The examples in these steps show how to upgrade from a 2X10G license to a 4X10GR license on an Ruckus ICX 7150.
In order to perform the following task, you must place a purchase order with Ruckus order management as needed. A unit number and the purchased license name is required.
  1. (Optional) Enter the show license installed command to check the licenses already installed on the device.
    ICX7150-24P Router# show license installed
    Unit License Name L3 Premium Port Speed Upgrade Speed Ports
    1    2X10G        No         Yes                10G   2
    
  2. Enter the show version command to verify license details. The Current License field displays the license you have currently installed on the device.
    device# show version
    =============================================================
    UNIT 1: SL 1: ICX7150-24P-2X10G 24-port Management Module
    Serial #:CYT3346K035
    Current License: 2X10G  
    P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
    ===========================================================
    
  3. Enter the license install perpetual command, followed by the unit number and the purchased license name.
    device# license install perpetual 1 4x10gr
    
    The example installs a perpetual 4X10GR license on unit 1.
  4. Enter y to accept the End User License Agreement (EULA), or n to cancel.
    Continue?(enter 'y' to continue, 'n' to cancel): y
    
  5. Confirm the license installation with the show license installed command.
    ICX7150-24P Router# show license installed
    Unit License Name L3 Premium Port Speed Upgrade Speed Ports
    1    4X10GR       Yes        Yes                10G   4
    2    2X10G        No         Yes                10G   2
    
    The example shows a 4X10GR license with Premium Layer 3 features is installed on unit 1, and a 2X10G license is installed on unit 2.
  6. Enter the show version command for additional details to verify that the license is installed correctly.
    device# show version
    =============================================================
    UNIT 1: SL 1: ICX7150-24P-2X10G 24-port Management Module
    Serial #:CYT3346K035
    Current License: 4X10GR  
    P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
    =============================================================
    
    NOTE
    If you attempt to update a license that is already installed on the device, an error message is displayed, as shown in the following example.
    device# license install perpetual 1 2x10g
    License package 2x10g is already installed.
    device#

沒有留言:

張貼留言