修復遺失的 DLL files

Dll-error-fixes : http://www.dll-error-fixes.com

Dll fixes : http://www.dll-files.com

找出Windows 當機禍首 (memory dump)

Step:
1. Windows memory dump dir : Windows/Minidump  filetype: .dmp
2. download BlueScreenView : http://www.nirsoft.net/utils/blue_screen_view.html
3. Run BlueScreenView
4. Click dmp file -> find Cause By Driver and File Description field
可以得知為何當機!! XD

免費office (free office)

Libreoffice
Kinfsoft office
openoffice

HP

DDR3 Memory Configuration Tool

http://h18004.www1.hp.com/products/servers/options/tool/hp_memtool.html

HP Power Advisor

http://h18004.www1.hp.com/products/solutions/power/index.html

HP Performance Advisor 主動調教software 效能 in workstation .

http://h20426.www2.hp.com/program/workstation/tw/zh/PTF.aspx

HP Product Bulletin

http://softadvice.informer.com/Hp_Product_Bulletin_Download.htmlduct_Bulletin_Download.html

DriverEasy 驅動程式更新工具

http://www.drivereasy.com

windows office 序號忘了---download produkey software

download  produkey software

環控門禁系統setup

cd \ocx
regsvr32 DigitBox.ocx
regsvr32 SwitchButon.ocx
regsvr32 Gauge.ocx


IE browser setup:
1.將 ip address 加入 信任網域
2.將網際網路選項中安全性之信任網域>改為自定等級
3.將 Active X 選項 全改為 啟用 即可

****************************************
reg.bat(以系統管理者執行)


copy *.* C:\WINDOWS\system32
regsvr32 /s C:\WINDOWS\system32\DigitBox.ocx
regsvr32 /s C:\WINDOWS\system32\Gauge.ocx
regsvr32 /s C:\WINDOWS\system32\SwitchBouton.ocx
regsvr32 /s C:\WINDOWS\system32\bmscal.ocx
regsvr32 /s C:\WINDOWS\system32\Bmsmap.ocx
regsvr32 /s C:\WINDOWS\system32\BMSPMRX.ocx
regsvr32 /s C:\WINDOWS\system32\bmspx.ocx
regsvr32 /s C:\WINDOWS\system32\bmsschedule.ocx
regsvr32 /s C:\WINDOWS\system32\bmssearch.ocx
******************************************************

LLDP (CDP FDP) setup 即可使用 fluke

Brocade
Ref:
http://community.brocade.com/thread/5072?start=0&tstart=0 

cdp run
fdp run

 

To enable a Brocade device to globally send FDP packets, enter the following command at the

global CONFIG level of the CLI.

FastIron(config)# fdp run

Enabling FDP at the interface level

You can enable FDP at the interface level by entering commands such as the following.

FastIron(config)# int e 2/1

FastIron(config-if-2/1)# fdp enable

To enable the device to intercept and display CDP packets, enter the following command at the global CONFIG level of the CLI.FastIron(config)# cdp runEnabling interception of CDP packets on an interfaceYou can disable and enable CDP at the interface level. You can enter commands such as the following.FastIron(config)# int e 2/1
FastIron(config-if-2/1)# cdp enable

Syntax: show fdp neighbors [detail | ethernet [<slotnum>/]<portnum>]
 To display CDP entries for all neighbors, enter the following command.FastIron# show fdp neighbors
Displaying CDP entries
Displaying neighbors

Enabling interception of CDP packets globally

Reading CDP packets
**********************************************************
lldp is not avail
**********************************************************
Configure LLDP values.
Enable LLDP on the switch ports.
Start LLDP.
Write the running configuration to the startup configuration.

Control_Room # config t
Control_Room (config)# lldp enable ports all   (default configure ;不需執行)
Control_Room (config)# lldp run
Control_Room (config)# wr mem

no lldp run
no lldp enable ports all



Control_Room#show lldp

Control_Room(config)#show lldp neighbors

Control_Room(config)#show lldp neighbors detail ports ethernet 1/1

Enabling FDP globally

****************************************************************
CISCO CDP
ref:  http://www.netadmin.com.tw/article_content.aspx?sn=1412100003&jump=2

2014/12/24

自動協尋附近所有設備 相互交換資訊以供管理維運

管理大型網路利器 Cisco設備專屬CDP協定

胡凱智

show cdp neighbors這個指令而言，可以取得以下這些資訊：

1. 鄰近設備的Device ID
2. 本地端的介面
3. Hold-time值，單位是秒
4. 鄰近設備的種類代碼
5. 鄰近設備的硬體平台
6. 鄰近設備的遠端埠ID
表1 鄰近設備的種類代碼及其代表意義

proxmox v2.0 guild

PROXMOX v 2.0  

 http://www.proxmox.com
user: root
http://203.68.0.76:8006


virtual machine:
1.vmware
2.KVM (create vm)
3.Xen (create CT)
4.Hyper-V

setup directory:
1. /etc/pve : config file
    for example: /etc/pve/qumu-server : guest os config

2./var/lib/vz : guest os images
    foe example:  /var/lib/vz/images : guest os images