設定 > WLANs > 增加 SSID name >修改 WLANs GROUP
AP setup
inital seatus : FAT ap
reset inital status: press RST button return to FAT AP mode
return to Thin ap mode :
1. browse mode : AP 背面貼紙有 ip ,user,password
2. ssh mode : 在 cli 介面下指令
3. 更改 ip 即可(不可使用AP ip，請用不同ip，以免產生Duplicate name)
可透過廣播找到控制器(同網段)，若不同網段須加控制器ip
4.置換AP後，再至控制介面將原有AP clear
AP Communication protocol
1.CAPWAP CAPWAP uses UDP ports 5246 (control channel) and 5247 (data channel)
2.LWAPP
[root@logdb svrmon]# nmap -n -P0 -sU 10.10.5.52 -p 5246 --host_timeout 3000
Starting Nmap 5.51 ( http://nmap.org ) at 2015-05-25 11:19 CST
Nmap scan report for 10.10.5.52
Host is up (0.00054s latency).
PORT STATE SERVICE
5246/udp closed capwap-control (device up)
Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds
[root@logdb svrmon]# nmap -n -P0 -sU 10.10.5.59 -p 5246 --host_timeout 3000
Starting Nmap 5.51 ( http://nmap.org ) at 2015-05-25 11:19 CST
Nmap scan report for 10.10.5.59
Host is up.
PORT STATE SERVICE
5246/udp open|filtered capwap-control (device down)
